Sieve Analysis of up to 6 kg Sample Weight
TYLER Ro-Tap® RX-94 with two sieve sets for dry sieving
The TYLER Ro-Tap® RX-94 for test sieves up to 203 mm diameter can take 2 sieve sets simultaneously. It reproduces the circular and tapping motion of hand sieving but with an even mechanical action. It is manufactured by W.S. Tyler, the American subsidiary of HAVER & BOECKER.
Two at one go.
- Simultaneous analysis of 2 samples.
- The 3D sieving action saves time and manual re-sieving.
- Enables sieving of agglomerating bulk materials.
- Easy handling – only sieving time has to be set.
Technical data
| Sieve diameters | 200 mm, 203 mm (8") |
|---|---|
| Sample weight | approx. 2 x 3 kg |
| Operating voltage | 230 Volt, 50-60 Hertz |
| Timer | 0-99 minutes |
| Taps per minute | 150 |
| Oscillations per minute | 278 |
| Drive | electric motor with worm gear |
| Sound emission | 86 dBA (without sound enclosure cabinet) |
| Weight | approx. 100 kg (without test sieves) |
| Dimensions | 750 x 680 x 560 mm (B x T x H) |
Application examples for the TYLER Ro-Tap® RX-94
- Diamonds
- Abrasives
- Metal powder and metal swarf
- Powder
- Tobacco
- Cacao
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the Ro-Tap® RX-94. It is suitable for up to 12 test sieves with full height or 26 half-height sieves and two sieve pans with a diameter of up to 203 mm (8”) or 200 mm.
Please note that the TYLER Ro-Tap® RX-94 without cupboard does not reach the requirements of CE-labelling.We recommend to use a sound enclosure to reduce the sound emission.
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.
Click here to find all spare parts for TYLER Ro-Tap®.
HAVER CSA 5.0 Software
Test the HAVER CSA 5.0 NETWORK for one month free of charge.
