Sieve Analysis of up to 6 kg Sample Weight
TYLER Ro-Tap® RX-30 for dry sieving
 |
The TYLER Ro-Tap® RX-30 for test sieves up to 305 mm diameter reproduces the circular and tapping motion of hand sieving but with an even mechanical action. The TYLER Ro-Tap® RX-30 is manufactured by W.S. Tyler, the American subsidiary of HAVER & BOECKER.
Most suitable machine for abrasive materials
- Enables sieving of agglomerating bulk materials.
- Prescribed in the FEPA-standard for abrasive industry.
Further advantages at a glance
- The 3D sieving action saves time and manual re-sieving.
- Easy handling – only sieving time has to be set.
Technical data
| Sieve diameters | 300 mm, 305 mm (12") |
|---|---|
| Sample weight | approx. 6 kg |
| Operating voltage | 230 Volt or 115 Volt, 50-60 Hertz |
| Timer | 0-99 minutes |
| Taps per minute | 150 |
| Oscillations per minute | 278 |
| Drive | electric motor with worm gear |
| Sound emission | 86 dBA |
| Weight | approx. 82 kg (without test sieves) |
| Dimensions | 710 x 540 x 640 mm (B x T x H) |
TYLER Ro-Tap® RX-30 - application examples
- Diamonds
- Abrasives
- Metal powder and metal swarf
- Powder
- Tobacco
- Cacao
- Mining Industry
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the TYLER Ro-Tap® RX-30. It is suitable for up to 5 test sieves with full height or 12 half-height sieves and one sieve pan with a diameter of up to 305 mm (12”) or 300 mm.
Please note that the TYLER Ro-Tap® RX-30 without cupboard does not reach the requirements of CE-labelling. We therefore recommend to use the CE-execution with safety cupboard with external control gear (TYLER Ro-Tap® RX-30-CE).
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.
Click here to find all spare parts for TYLER Ro-Tap®.
HAVER CSA 5.0 Software
Test the HAVER CSA 5.0 NETWORK for one month free of charge.
