Sieve Analysis of up to 3 kg Sample Weight
HAVER EML 200 digital plus for dry and wet sieving
The HAVER EML 200 digital plus for test sieves with diameters of up to 203 mm can be used for dry and wet sieving of 3 kg bulk material maximum. It is the smallest test sieve shaker with an electromagnetic drive of HAVER & BOECKER. You can set and store sieving time, interval and amplitude for reproducible sieving results.
Controlled sieving action
- The 3D sieving action saves time and manual re-sieving.
- Self-readjusting amplitude for comparable sieving results.
Further advantages at a glance
- Memory of 99 sieving programs.
- Low-noise and maintenance free.
- Test sieves can be changed easily by using the quick-release clamping system TwinNut.
Technical data
| Sieve diameters | 76 mm (3")*, 100 mm*, 150 mm*, 200 mm, 203 mm (8") |
|---|---|
| Sample weight | approx. 3 kg |
| Weight of sieve set | max. 8.7 kg |
| Operating voltage | 230 Volt oder 110 Volt with transformer, 50-60 Hertz |
| Amplitude | constant, self-readjusting amplitude up to maximal 3 mm |
| Timer | 0-99 minutes or permanent operating |
| Power consumption | ca. 410 VA with full charge |
| Sound emission | ≤ 70 dBA |
| Weight | approx. 34 kg (without test sieves) |
| Dimensions | 345 x 285 x 950 mm (D x W x H) |
* Adapter is required
HAVER EML 200 digital plus - application examples
Suitable test sieves for your application
It depends on your application which test sieves should be used for sieve analysis with the HAVER EML 200 digital plus. It is suitable for up to 9 test sieves with normal height or 15 sieved with reduced height and one sieve pan with a diameter of up to 203 mm (8”) or 200 mm.
We offer test sieves from 20 micron up to 125 mm according to your requirements or you can take a standard sieve set with following specifications:
Dimensions: | Test Sieves 200 x 50 mm according to DIN ISO 3310-1 / ASTM |
|---|---|
Openings: | 45 µm, 63 µm, 125 µm, 250 µm, 500 µm, 1 mm, 2 mm, 4 mm, sieve pan |
E-Shop Particle Analysis
With this E-Shop button the required test sieve shaker can be specified directly.








