Photooptical Particle Analysis in 2 Measuring Ranges from 35 micron

HAVER CPA 4-2 with 2 measuring ranges for particle sizes from 35 micron

The HAVER CPA 4-2 is equipped with two separate measuring ranges, whereby it is possible to measure fine and coarse materials on one unit photooptically. With its robust construction it is suitable for large sample quantities and can be used in laboratories or pilot plants.

Right in the middle

Integrable in current production as an online device.
Both, the measuring unit as well as the HAVER CPA Software are prepared for an online connection to a PLC system.

Further advantages at at glance

Measurement in two measuring ranges.
Analysis of all particle sizes and particle shapes in real time
(HAVER REAL TIME).
Reproducible measuring results.
Noise reduction by rubberized feeder and funnel.
Use as a particle counting device.

Technical data

Measuring ranges	0.035 - 15 mm / 0.091 - 90 mm
Operating voltage	230 Volt, 50 Hertz or 115 Volt, 60 Hertz
Chute width	100 mm / 300 mm
Camera	CCD-line camera
Lighting module	LED
Protection class	IP 54
Interfaces	digital IO-Ports, GigE, RS 232
Line resolution	4096 Pixel
Pixel frequency	60 MHz
Dimensions	1770 x 810 x 1050 mm (L x W x H)
Weight	approx. 152 kg

Application examples for the HAVER CPA 4-2

Measuring range one from 35 µm up to 15 mm is designed for the particle size and shape analysis of sand or split. Measuring range two from 91 µm up to 90 mm has been optimized to analyse materials like gravel and grit.

Gravel
Grit
Sand
Salt and sugar
Coal
Ore
Ceramic

The HAVER HSD is used to pre-dry wet material, the HAVER DMS offers pre-classification of material. Both devices play a decisive role in reducing the measuring time.